Wet-Process Cement
HydraFlow W100
This product is an effective dispersant for raw mix slurries in a wet-process cement plant. Use of HydraFlow W100 allows the amount of water in the slurry to be reduced, thereby saving both water and, more importantly, energy costs in the kiln.
| Typical Property | Value |
|---|---|
| Description | Modified acrylic polymer |
| Appearance | Almost colourless, clear liquid |
| Odour | Very mild odour |
| pH | 6.5 -9.0 |
| Solids content | 43 - 47% |
| Specific Gravity | 1.30 kg/litre approx |
| Typical Dosage | Benefits are apparent at dosage rates as low as 3 kg per tonne of raw mix, but higher doses are normally required to achieve substantial cost savings. |
| Hazard Rating | Classified as non-hazardous according to the criteria of Worksafe Australia |
| Storage | We recommend that this product is stored indoors at temperatures above +5°C. Some minor crystallisation may occur at lower temperatures, but the product will reconstitute on warming Shelf life: min. 12 months under normal conditions |
| Pack Sizes | 20 litre, 200 litre, 1000 litre and bulk |